What is Gasfitting work?
Get to know the regulation
Under Part 4 of the Plumbing Regulations 2018, Gasfitting work is the construction, installation, replacement, repair, alteration, maintenance, testing or commissioning of any pip, appliance, flue, fitting, apparatus, control or other item that is invovled with the supply or use of gas and that is fitted downstream of the gas supply point and includes:
- any gas appliance in, or on, a caravan or a vessel; and
- any roof sheeting and roof flashing that is necessary for the purpose of any work described in this subregulation; and
- any design work that is incidental to, or associated with, any work described in this subregulation.
Gasfitting work does not include:
- any specialised gasfitting work; or
- any Type B gasfitting work; or
- any cleaning, painting or preparation work in relation to gas pipes or gas pipe joints that does not involve the connection, disconnection or alteration of those pipes or joints; or
- the connection or disconnection of a gas storage container for the purpose of filling or refilling, exchanging, storing or disposing of the container; or
- any work in relation to an item that is involved with the supply or use of gas that relates to the propulsion system, or any system that is powered by the propulsion system, of any motor vehicle or vessel.
Typical Gasfitting work
Gas appliances can vary in size, operating pressure and complexity, ranging from small domestic gas space heaters to large industrial steam boilers or industrial furnaces. Victoria’s Gas Safety Act 1997 defines gas appliances as either Type A or Type B.
Gasfitting work with these two types differs in nature, complexity and risk. For this reason, gasfitters need to be qualified for and experienced with the type of appliance on which they are working.
Experienced Gasfitting plumbers typically do the following work with Type A appliances:
- installing and testing LPG and natural gasfitting lines
- installing and commissioning Type A gas appliances – for example, hot water services, space heaters, ducted heating units, gas stoves and cook tops
- providing for adequate ventilation when installing one or more Type A gas appliances
- installing flues through ceilings and roofs constructed of different materials, with appropriate clearances and flue termination.
What do Gasfitting plumbers need to know and do?
Gasfitters need critical knowledge and skills to ensure the health and safety of the community. What does this mean for you?
As a registered practitioner, you must be able to understand and apply the compliance requirements of Gasfitting work. These requirements include:
- AS/NZS 5601.1 General gas installations
- AS/NZS 5601.2 LP gas installations in caravans and boats for nonpropulsive purposes
- the gas certification scheme for approved gas appliances and products
- clearance requirements specified in the relevant Australian Standard and manufacturer specifications.
To undertake Gasfitting work to a safe and competent standard, you must also be able to:
- read a site or building plan and identify gas lines and appropriate locations and clearances for installing Type A gas appliances
- read, interpret and apply manufacturer specifications for installing Type A gas appliances
- size pipes correctly for different installation jobs
- identify and calculate ventilation requirements when installing Type A gas appliances
- install trench support when pipework is installed at a depth of 1.5m or deeper, move the support along the trench, and remove the support safely
- understand the difference between Type A and Type B gas appliances.
What competencies and experience do you need?
The VBA publishes a set of units of competency for each class of plumbing work. Each unit of competency describes a work outcome, all the knowledge and skills needed to do the work to the expected standard, and how they should be assessed.
The VBA uses the units of competency to assess your skills and experience if you apply to register in a class of plumbing work.
To be eligible to register in the Gasfitting class, you must be able to show:
- you have the relevant competencies plus recent and relevant experience in work related to the gasfitting class of plumbing, or
- you have knowledge equal to the competencies of Certificate III for Gasfitting work, plus at least four years of experience while working under the supervision of a plumber who is licensed in Gasfitting work.
You must also prove you successfully completed an accredited training course in Install Trench Support.
Before applying for registration or licensing, please read the current approved units of competency for Gasfitting.
Units of competency for Gasfitting work
A common set of eight units are required for all of the main classes, except Refrigerated Air-conditioning and Type B Gasfitting.
- Carry out interactive workplace communication (CPCPCM2039A)
- Read plans and calculate plumbing quantities (CPCPCM2040A)
- Work effectively in the plumbing and services sector (CPCPCM2041A)
- Carry out WHS requirements (CPCPCM2043A)
- Handle and store plumbing materials (CPCPCM2045A)
- Use plumbing hand and power tools (CPCPCM2046A)
- Carry out levelling (CPCPCM2047A)
- Provide basic emergency life support (HLTFA211AP)
- Work safely on roofs (CPCPCM2055A)
- Carry out simple concreting and rendering (CPCPCM2054A)
- Flash penetrations through roofs and walls (CPCPCM3021A)
- Cut and join sheet metal (CPCPCM2048A)
- Mark out materials (CPCPCM2050A)
- Weld using oxy-acetylene equipment (CPCPCM2052A)
- Cut with Oxy-LPG / Acetylene equipment (CPCPCM2049A)
- Fabricate and install non-ferrous pressure piping (CPCPCM3023A)
- Install trench support (RIICCM210A)
- Install LPG systems in caravans, mobile homes and mobile workplaces (CPCPGS3046A)
- Install LPG systems in marine craft (CPCPGS3047A)
- Install gas pressure control equipment (CPCPGS3048A)
- Install Type A appliance flues (CPCPGS3049A)
- Install Type B gas appliance flues (CPCPGS3050A)
- Purge consumer piping (CPCPGS3051A)
- Maintain Type A gas appliances (CPCPGS3052A)
- Disconnect and reconnect Type A gas appliances (CPCPGS3053A)
- Calculate and install natural ventilation for Type A gas appliances (CPCPGS3054A)
- Install gas piping systems (CPCPGS3056A)
- Size consumer gas piping systems (CPCPGS3057A)
- Install LPG storage of aggregate storage capacity up to 500 litres (CPCPGS3059A)
- Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 KL (CPCPGS3060A)
- Install and commission Type A gas appliances (CPCPGS3061A)
- Establish legal and risk management requirements of small business (BSBSMB401A)
- Carry out work based risk control processes (CPCPCM4011A)
- Estimate and cost work (CPCPCM4012A)
- Design and size consumer gas installations (CPCPGS4011C)